Caner Şimşir, Yrd. Doç. Dr.

Caner Şimşir

İletişim Bilgileri

Telefon:8859
Telefon:8824
Ofis:I 202
Bağlı Olduğu Bölüm:İmalat Mühendisliği Bölümü

Akademik Dereceler

DereceAlanÜniversiteYıl
Doktora Metalurji ve Malzeme Mühendisliği Orta Doğu Teknik Üniversitesi 2008
Yüksek Lisans Metalurji ve Malzeme Mühendisliği Orta Doğu Teknik Üniversitesi 2002
Lisans Metalurji ve Malzeme Mühendisliği Orta Doğu Teknik Üniversitesi 2000


Akademik Ünvanlar

DereceÜniversiteAyYıl
Yardımcı Doçent ATILIM ÜNİVERSİTESİ Eylül 2011


Yayınlar

SCI, SCI-E, SSCI ve AHCI

A. Eser, C. Broekmann, C. Simsir (2016), Multiscale Modelling of Tempering of AISI H13 Hot-work Tool Steel– Part I: Prediction of Microstructure Evolution and Coupling with Mechanical Properties, Computational Materials Science, 113, pp. 280-291

A. Eser, C. Broeckmann, C. Simsir (2016), Multiscale modeling of tempering of AISI H13 hot-work tool steel – Part 2: Coupling predicted mechanical properties with FEM simulations, Computational Materials Science, 113, pp. 292-300

O. Mustak, E. Evcil, C. Simsir (2016), Simulation of through-hardening of SAE 52100 steel bearings – Part I: Determination of material properties, Materials Science and Engineering Technology, 47 (8), pp. 735–745

E. Evcil, O. Mustak, C. Simsir (2016), Simulation of through-hardening of SAE 52100 steel bearings – Part II: Validation at industrial scale, Materials Science and Engineering Technology, 47 (8), pp. 746–754

Lübben, T., Hunkel, M., Hoffmann, F., Zoch, H.-W., (2012), Anisotropic Tranformation Strain and Its Consequences on Distortion During Austenitization, Materials Performance and Characterization, 1, pp. 150-173

Şimşir C.,Eisbrecher, I., Hunkel, M., et al, (2011), The Prediction of Distortion of Blank-Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operations, Steel Research International, Special Edition ICTP , pp. 131-136

Şimşir C.,Hunkel, M., et al, (2011), Process Chain Simulation for Prediction of the Distortion of Case-Hardened Gear Blanks, Materialwissenschaft und Werkstofftechnik, 43, pp. 1-8

Şimşir C.,Wolff M., Suhr B (2010), Parameter identification for an Armstrong-Frederick hardening law for supercooled austenite of SAE 52100 steel, Computational Materials Science, 50-2, pp.487-495

Şimşir C., Lübben T., Hoffmann F., Zoch H-W. (2010), Dimensional analysis of the thermomechanical problem arising during through-hardening of cylindrical steel components, Computational Materials Science, 49, pp.462-472

Şimşir C., Dalgic M., Lübben T., et al (2010), The Bauschinger effect in the supercooled austenite of SAE 52100 steel, Acta Materialia, 58, pp.4478-4491

Şimşir C., Gür C.H. (2010), Simulation of Quenching Process for Prediction of Temperature, Microstructure and Residual Stresses, Journal of Mechanical Engineering, 56, pp.93-103

Şimşir C., Karpuz P., Gür C.H. (2010), Quantitative Analysis of the Influence of Strain Hardening on Equal Channel Angular Pressing Process, Computational Materials Science, 48, pp.633-639

Şimşir C.,Gür C.H. (2010), Application of Computer Simulations in Heat Treatment Industry, Quenching Theory and Technology, 2nd Edition (ISBN 978-0-8493-9279-5)

Şimşir C., Karpuz P., Gür C.H (2009), Investigating the Effects of Hardening Behavior of Aluminum Alloys on Equal Channel Angular Pressing: A Finite Element Study, Materials Science and Engineering A, 503, pp.148-151

Şimşir C., Gür C.H. (2008), A FEM based Framework for Simulation of Thermal Treatments: Application to Steel Quenching, Computational Materials Science, 44, pp.588-600

Şimşir C.,Gür C.H. (2008), 3D FEM Simulation of Steel Quenching and Investigation of the Effect of Asymmetric Geometry on Residual Stress Distribution, Journal of Materials Processing Technology, 207, pp.211-221

Diğer Hakemli Dergiler

Şimşir C., Lübben, T., Hoffmann, F., et al (2011), Prediction of Distortion in Through Hardening of Cylindrical Workpieces by Dimensional Analysis, Materials and Manufacturing Processes,

Şimşir C.,Maradit B.P., Lübben T., Gür C.H., (2011), Metallurgical Influence on Quench Distortion of SAE 52100 Long Cylinders,, International Journal of Heat Treatment and Surface Engineering,, 5, pp. 57-60

Şimşir C.,Gür. C.H. (2010), A New framework for Simulation of Heat Treatments, Int J Microstructure and Materials Properties (IJMMP) , 5, pp.399-411

Şimşir C.,Gür C.H. (2009), A Review on Modeling and Simulation of Quenching, Journal of ASTM International, 6, pp.1-29

Şimşir C.,Karpuz P., Gür C.H. (2009), Simulation of equal channel angular pressing applied to produce structures with ultrafine-sized grains, Int J Microstructure and Materials Properties (IJMMP) , 4, pp.356-367

Şimşir C.,Karpuz P., Gür C.H., Kim H.S (2008), Finite Element Investigation of the Effect of Hardening Behavior of Alloys on Equal Channel Angular Pressing Performance, Materials Science Forum , 584, pp.1021-1026

Şimşir C.,Gür C.H. (2008), A Mathematical Framework for Simulation of Thermal Processing of Materials, Turkish J. Eng. Env. Sci, 32, pp.85-100

Uluslararası Konferans Bildirileri

Şimşir C., Felde, I. (2013), Simulation and Optimization in Quenching Technology for Automotive Components, Heat Treatment and Surface Engineering Conference, Chennai, India

Eser, A., Bezold, A., Simsir, C., Broeckmann, C. (2013), Simulation of Hardening and Tempering of Tool Steels, Simulationsforum 2013 – Schweissen und Waermebehandlung, Weimar, Germany

Hunkel, M., Rentsch, R., Lütjens, J., (2012), FEM Modelling of the Distortion of the Blank/Case Hardened Gear Blanks due to Chemical Banding, Quenching and Control of Distortion, Chicago, ABD

Eser, A., Bezold, A., Broechmann, C., Kozeschnik, E., (2012), Tempering of Tools Steels – A Multiscale Simulation, 9th International Tooling Conference, Loeben, Avusturya

Eser, A., Bezold, A., Broechmann, C., (2012), Simulation des Verzugs beim Anlassen dickwandiger Bauteile aus 56NiCrMoV7, Haerterei Kolloquium 2012, Wiesbaden, Almanya

Eisbrecher I., Hunkel M., Lübben T., Hoffmann F., (2011), The Prediction of Distortion of Blank-Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operations, 10th Conference on Technology of Plasticity, Aachen, Germany, pp. 386-391

Hunkel, M., Rentsch, R., Lütjens, J., (2011), The Prediction of Distortion of Blank-Hardened Gear Blanks by Considering the Effect of Prior Manufacturing Operations, International Conference on Distortion Engineering, Bremen, Germany, pp. 437-446

Eisbrecher I., Clausen B., Hunkel M., Lübben T., (2011), Anisotropies and Inhomogenities in the Microstructure of the Case Hardening Steel SAE 5120 and its Influence on Distortion, 3rd International Conference on Distortion Engineering , Bremen, Germany, pp. 135-146

Eser A., Bezold A., Broeckmann C., Bambauer K., (2011), Simulation of the Deformation and Residual Stress Evaluation during Tempering of a Hot Work Tool Steel, 3rd International Conference on Distortion Engineering , Bremen, Germany, pp. 515-522

Eser A., Bezold A., Broeckmann C., Bambauer K., (2011), Simulation of Deformation and Residual Stress Evolution during Quenching and Tempering of Tool Steel, 3rd International Conference on Heat Treatment and Surface Engineering of Tools and Dies, Wels, Austria, pp. 33-42

Kitapta Bölüm

C. Simsir (2014), Modeling and Simulation of Steel Heat Treatment: Prediction of Microstructure, Distortion, Residual Stresses and Cracking, ASM Metals Handbook Volume 4B - “Steel Heat Treating Technologies”, Ohio, Illinois, 409-466

Şimşir C.,Gür C.H. (2010), A Review on Modeling and Simulation of Quenching - Chapter in STP 1523 (Selected Technical Papers) : Quenching and Cooling, Residual Stress and Distortion Control, ASTM Int, ISBN 978-0-8031-7509-9,

Şimşir C.,Gür C.H. (2009), Simulation of Quenching, Handbook of Thermal Process Modeling of Steels, (ISBN 978-0-8493-5019-1)